Open topic with navigation

Configure Bitmaps

1. Select the bitmap on the canvas or in the Project pane. For more information, refer to Select Shapes and Entities.
2. In the Properties pane, you can edit the properties in the table that follows.

Table:     Bitmap Properties

3. Property	Description
   Rotation	Rotates the bitmap about its center by increments of 90 degrees.
   Reflection	Reflects the bitmap horizontally, vertically or in both directions.
   Overscan Distance	The amount of buffer distance to use when marking to allow the acceleration of the marking motion to settle.
   Marking Pixel Size	Change the marking pixel size. Refer to Marking Pixel Size.
   Marking Direction	Specify if you want to mark the bitmap horizontally or vertically.
   Marking Pattern	Specify if you want to mark unidirectionally or bidirectionally.
   Bidirectional Offset	The offset distance to use to align the pixels when you are marking bidirectionally. This value is a function of marking speed and laser latency. You must experiment with different values until you find a value that has visually satisfactory results. Refer to How Bitmaps Are Marked.

Open topic with navigation